Looking for custom print ready Heat Transfers for your apparel needs, look no further.
These are NOT vinyl, HTV or stickers.
What it Can be Applied On?
All Fabric Colors: Cotton, Polyester, Cotton/Polyester Blends, Tri-Blends
NOT RECOMMENDED FOR: LYCRA, SPANDEX
*A QUALITY HEAT PRESS REQUIRED to properly apply the graphic from the paper to substrate/textile.
USA Toner Transfers Can NOT be applied using an IRON.
Personalize any shirt with custom printed graphics. Whether you need branded for Business or Personal! Upload your image or logo. All orders are printed on high quality transfers that are durable.
Color: Printed in Full Color or Single Color on sizes listed below.
**Remember, you can fit as much as you can on an
11.7"x16.5" (11.5"x16.25" printable area) or 8.27"x11.69" (8"x11.5" printable area)**
Place the transfer where you want it on the GARMENT/T-SHIRT, heat tape can be used to tack it down.
Cover with silicone parchment paper - we will supply this with your order.
Press at 310° Degrees for 30 seconds, for Cotton Textile.
Press at 265° Degrees for 30 Seconds, for Polyester (Blends)
Allow to COOL COMPLETELY about 5 minutes.
These are COLD PEEL transfers.
Peel slowly when ABSOLUTELY COLD.
-Start peeling from one corner
in a continuous Rolling Motion,
Rolling your hand over the
carrier as you go.
Press one more time with silicone parchment paper.
20 seconds @ 310° F
15 seconds @ 265°-285° F
Wait 10 second before removing the silicone parchment paper from Final Press.
1) Choose your Product
Fill out the product details: project title, quantity, etc. and proceed to file upload area to upload your files.
2) Upload files
After you upload the files please click on the Continue button to add the product into the shopping cart. Choose the turnaround time and proceed to checkout.
Please send us your file ready to print in the size you want. AI, SVG, PSD, PNG transparent.
All Designs must be transparent with no background.
Vector or 300dpi bitmap/raster with a transparent background file only.
Color profiles should be set as CMYK, Using 300 PPI HIGH RESOLUTION.
All black should be composite black (C=100, M=100, Y=100, K=100).
Fine lines should be no less than 1pt thick for vector and 2pt thick for raster.
Select your payment method and shipping address. Click Continue to review your order. Click on Submit to finish. Your credit card will be charged and we will email you your invoice immediately.